Jemmer's blog: 2010

Friday, December 10, 2010

SX70 case

PB130410
Originally uploaded by Jemmer7

always wanted a case for my SX70, but haven't been shooting it for a while, so I just put all the ideas aside for years, then I ran into Filme's CC, and we developed this - a case that could actually be use, and being useful, not a piece of antique , you can hang it on your belt as a low slung case, or you can strap it as a shoulder bag, and, there's a compartment for all the instant photo you shot.

the station

PA270371
Originally uploaded by Jemmer7

I like writing pads, and I like pencils, and I like drafting with different colors, I need a lot of pens and pencil with me to do that on the go, and with pencils, I'll need eraser as well.. so here I go, made myself "the station", writing pads and all the stationary I need.

Film case

PB240460
Originally uploaded by Jemmer7

Ever have problem shooting out and struggling with the film rolls inside your "huge" bag? well, I did..

"the film case" will fit 5 roll of 120 or 4 rolls of 135 film, could snap on strap of your bag or camera strap or your belt for super easy access.

...what more? it'll also fit a lot of P&S camera like Klasse or an LCA with a roll of film!

Sunday, November 21, 2010

Strap Rolleiflex V.2

Strap Rolleiflex V.2
Originally uploaded by Jemmer7

custom made strap for Rolleiflex with original clip..

ready to go!

PB160431
Originally uploaded by Jemmer7

Friday, November 19, 2010

My coin case.. finally

Been making leather stuff for a while, but always something for others, never realy made anything for myself except some prototype testing subjects... until now.

Thursday, July 15, 2010

close up with SL66

SL66 642
Originally uploaded by Jemmer7

Thursday, June 3, 2010

炫燿新玩具 - Rolleiflex SL66

1. 這，其實是Mrs Jemmer的玩具，我只是一個有股份的試機員 (當然，可以預計的是，“試機"的時間，會比攝影的時間多)

2. 這是純用家感受，並非Technical Review。

簡單的講，SL66是一部像Rolleiflex TLR操作的中片幅單鏡反光機，跟Hasselblad很類同，但有很多"小異"...

H - 快門、光圈、對焦都在鏡頭上

R - 快門、對焦都設於機身，鏡頭上只有光圈

H - 近攝，須配Macro鏡、Macro filter (Proxar)、extension tube 或者Bellow

R - 由於對焦是靠機身Bellow進行，以標準鏡頭 Planar 80/2.8 來講，最近對焦以達到16CM！

還不夠近？可直接將鏡頭到接，配合機身bellow，可達1:1.5 Macro

H - 跟80/2.8重大概1.3kgs，較為輕便

R - 跟80/2.8重大概1.9kgs > 如果你跟我一樣，經常拍近攝，一套Hass+Macro鏡 / extension tube等等，我想重量差不多吧?

H - 會Jam鏡頭

R - 也懂Jam片背!!

* 其實用Hass / SL66時，只要習慣每影完一幅後立刻上片/上快門，Jam機幾會影該很小! (某"朋友"例外)

H - Planar 80/2.8 HFT 很多人都覺得是無敵標頭

R - Planar 80/2.8 無HFT版，傳說比Hass版本更厲害! 有待發掘....

H - A12影12幅，A24影24幅，好多人用A24影120，但長用應該對機械有點影響，最小，有機會疊片吧

R - 一個背就可以120/220通用，影120還可以影到"13"幅！

H - 豆腐刀.....

R - 機背本身就有拍攝狀態時收藏豆腐刀的暗格，而備機狀態時，豆腐刀會所住快門 (Hass後期機背才有供拍攝狀態的豆腐刀插座)

H - 唔知有無... ??

R - 有快門鎖，仲有Double Exposure!

H - 1/500（500系）

R - 1/1000

H - 鏡間快門，全速Flash Sync

R - Focal Plane Shutter，只有1/30 Flash Sync :(

H - .....

R - Bellow的另一個功能，就是提供上下8度移軸＞ Macro時解救境深太淺，並非一般移軸鏡補償水平或者像Lens Baby的效果.... !影遠境無得玩!

暫時發現的，就是這些，conclusion : 用係Hasselblad好用，玩係SL66好玩（好多），而SL66買一部小一部，Hasselblad，幾時買都有!

Sunday, April 18, 2010

finally done

R4419392
Originally uploaded by Jemmer7

my second half of my second bag order, this one's were ordered along the big tote bag, a week's work and I'm quite happy with the result. The dying process was a bit messy though.

Saturday, April 3, 2010

What can you do with JPY1,050?

P4021600
Originally uploaded by Jemmer7

You might barely get a good Ramen w/ a Coke in Osaka, well, if you look into the trash in Camera Shops, you might find surprise!

It was the last day of my trip, didn't had specific target for camera shopping this time anyway, but just head to a couple of shops I never been, as a sight-seeing activity. I went to this Camera Naniwa located in the underground mall of west Umeda, then Fion spotted this, and we were thinking, for this price, I don't care if it turn out to be a paper weight (or leather weight in my case)
I start checking it, all mechenic parts seems flawless, hmmm, strange....

Got home, put a battery in, I can't help but screamed : IT"S ALIVE! IT'S ALIVE!!!

even though the battery is 1.5v while the QL17 were suppose to run on 1.35v, but comparing to my handheld meter it seems this one been mod'd to take 1.5v, hmm, even better :D